Gamepad Tester › PS5 DualSense Test
PS5 DualSense Tester — Gamepad Tester
Free Online Tool — Popular

PS5 DualSense Test — Free Online PS5 Controller Tester

PS5 DualSense Tester: Test Adaptive Triggers, Haptic Feedback, Gyroscope, Touchpad, All Buttons & Analog Sticks — Instant, Free & No Download

The most complete free PS5 DualSense test tool online. Test every button on your PS5 controller — Cross, Circle, Square, Triangle, L1/R1, L2/R2 adaptive triggers, L3/R3 stick clicks, D-pad, touchpad, Create, Options, and PS button. Check analog stick drift, trigger analog range, gyroscope motion, haptic rumble motors, and more — all directly in your browser on PC or Mac. No download, no PS5 console needed, no sign-up required.

Live Button Test PS5 DualSense DualSense Edge Adaptive Triggers Haptic Feedback Gyroscope Touchpad Stick Drift Check No PS5 Needed
PS5 DualSense Live Test
No Controller
L20%
R20%
Connect PS5 DualSense via USB-C or Bluetooth · Chrome or Edge required
0
Buttons Pressed
0%
L2 Trigger
0%
R2 Trigger
0.000
L Stick Mag
0.000
R Stick Mag
0
Haptic Fires
PS5 DualSense Test — Interactive Tool
PS5 DualSense Controller Test
No Controller
Connect your PS5 DualSense: Plug in via USB-C cable (recommended for haptics) or pair via Bluetooth in your OS settings. Then press any button to wake the Gamepad API. Use Chrome or Edge — Firefox and Safari have limited DualSense support.
All DualSense Buttons — Press Each to Test
Press each button on your DualSense — it lights up red when registered. A button that stays dark is dead or stuck.
Analog Sticks — Live Position & Drift Check
Left Stick (LS)0.000
X
0.000
Y
0.000
Idle drift: 0.000
Right Stick (RS)0.000
X
0.000
Y
0.000
Idle drift: 0.000
Stick drift check: leave both sticks untouched for 5 seconds. If the dot moves away from center or the drift value exceeds 0.05 (5%), your DualSense has stick drift. Values below 0.03 are normal sensor noise.
Adaptive Triggers — L2 & R2 Analog Range
L2 — Left Adaptive Trigger0%
0%25%50%75%100%
Raw value:0.000
L2 adaptive trigger with motorized resistance feedback. Squeeze slowly from 0% to 100% — should fill smoothly. Resistance levels are set by games and apps.
R2 — Right Adaptive Trigger0%
0%25%50%75%100%
Raw value:0.000
R2 adaptive trigger — the primary action trigger. In games like Returnal, the resistance point creates a "click" at 50% before full press. Check both 0% at rest and 100% at full press.
Adaptive trigger resistance (the physical spring tension change) is a PS5-exclusive hardware feature. This tester reads the trigger's 0–100% analog value via the Gamepad API. The motorized resistance itself requires the PS5 console or DSX/DualSenseX on PC with a native game — the tester cannot simulate or visualize resistance zones without those tools.
Haptic Feedback & Rumble Motors — DualSense Vibration Test
Motor Intensity
Strong Motor70%
Weak Motor40%
Duration500ms
The PS5 DualSense features two linear haptic actuators (not traditional spinning motors) in the grips. On PC via USB-C, the standard dual-rumble API works in Chrome and Edge. Advanced DualSense-specific audio-based haptics require the PS5 console or DualSenseX on PC.
Gyroscope & Accelerometer — 6-Axis Motion Test
DualSense 6-Axis IMU3-Axis Gyro + 3-Axis Accel
Pitch
0.0°
Roll
0.0°
Yaw
0.0°
Gyro requires Bluetooth on macOS/Linux Chrome, or Steam with PlayStation controller support on Windows. The demo simulates motion when no live gyro data is available.
Touchpad — Click & Touch Test
DualSense TouchpadNot Pressed
Press or click the touchpad
on your DualSense
Click StateReleased
Button (B17)0.00
Touch TypeNone
The DualSense touchpad functions as a clickable button (button index 17) via the Web Gamepad API. Full multi-touch position tracking requires the WebHID API available only in Chrome/Edge with explicit permission. Press the center of the touchpad to test the click registration.
Live Input Log
——Connect DualSense and press any button…
PS5 DualSense Features Explained

All PS5 DualSense Features — What This Test Covers

The PS5 DualSense is the most feature-rich consumer controller ever made. Here is every hardware feature and what our tester checks.

PS5 Exclusive

Adaptive Triggers (L2 / R2)

Each trigger contains a small electric motor and worm gear that physically alters the trigger's resistance mid-press. Games can create resistance zones, spring effects, or trigger locks. This tester reads the 0–100% analog value. Physical resistance requires PS5 or DualSenseX on PC.

Advanced Haptics

Haptic Feedback (Linear Actuators)

Two linear resonant actuators (LRAs) replace the traditional spinning motors. They respond to audio waveforms, enabling textures (sand, wood, metal), precise impact simulation, and individual left/right feedback. Standard dual-rumble works via browser; audio haptics require USB and PS5.

Testable

6-Axis Gyroscope & Accelerometer

A 3-axis gyroscope (pitch, roll, yaw) and 3-axis accelerometer form the DualSense's IMU. The gyro polls at 250Hz over Bluetooth. It enables gyro aiming in games like Fortnite and GT7. Testable via Chrome on macOS/Linux Bluetooth, or Steam Input on Windows.

Testable

Touchpad (Multi-Touch)

A large capacitive touchpad sits between the two grips. It registers as a clickable button (button 17) in the Gamepad API. Full multi-touch X/Y tracking requires WebHID in Chrome. The touchpad can swipe to open the map in Ghost of Tsushima, or swipe patterns in other titles.

Testable

Analog Sticks (L3 / R3)

Two analog sticks with 0.001 axis resolution and 250Hz polling rate. Each stick also functions as a digital click button (L3/R3). The DualSense is more prone to stick drift than DualShock 4 due to its potentiometer design — use this tester to catch early drift before it affects gameplay.

Built-In Mic

Built-In Microphone & Speaker

The DualSense includes a built-in microphone array and speaker. The speaker routes game audio — gun sounds in Returnal, dialogue in Astro's Playroom. The mic mute button has an LED indicator. Both are hardware features not accessible via the Gamepad API — use OS audio settings to test.

DualSense Technical Specifications
Controller Hardware
ConnectionUSB-C / Bluetooth 5.1
USB Polling Rate250Hz (4ms latency)
Gyroscope3-Axis · 250Hz over BT
Accelerometer3-Axis · 6-DOF IMU
Face Buttons4 × Digital (✕○□△)
Shoulder ButtonsL1 / R1 Digital
TriggersL2 / R2 Adaptive Analog
Analog Sticks2 × 360° with L3 / R3
D-Pad4-Way Digital
Feature Support on PC
Buttons / Sticks✓ Full (all browsers)
Trigger Analog Range✓ Full 0–100%
Standard Rumble✓ Chrome / Edge
Advanced Haptics⚠ USB + PS5 / DSX
Adaptive Triggers⚠ USB + PS5 / DSX
Gyroscope✓ BT · macOS/Linux
Touchpad Click✓ Button 17
Touch Position⚠ WebHID only
Microphone / Speaker✗ OS audio only
How to Test Your PS5 DualSense

How to Use the PS5 DualSense Tester

Complete PS5 controller test in under 5 minutes — no PS5 console required.

1

Connect Your DualSense

Connect your PS5 DualSense via USB-C cable directly to your PC (recommended — ensures full haptic and trigger support) or pair it via Bluetooth in Windows/macOS Bluetooth settings. Open Gamepad Tester in Chrome or Edge. Press any button to wake the Gamepad API. The status badge changes to "Connected" instantly.

USB-C preferredChrome or EdgePress any buttonNo PS5 needed
2

Test All 17 Buttons

Select the "All Buttons" tab. Press each button one at a time — Cross (✕), Circle (○), Square (□), Triangle (△), L1, R1, L2 (click), R2 (click), L3, R3, D-Up, D-Down, D-Left, D-Right, Create, Options, PS, and Touchpad. Each button lights up red when registered. A button that stays dark is dead, stuck, or the contact needs cleaning.

✕ ○ □ △L1 R1 L2 R2L3 R3 D-padCreate Options PS
3

Check Stick Drift

Switch to the "Analog Sticks" tab. Set the controller flat on a surface and leave both sticks completely untouched for 10 seconds. Watch the idle drift value. Under 0.03 is normal sensor noise. Above 0.08 consistently means early drift. Above 0.15 means advanced drift that is likely visible in gameplay. The DualSense is more prone to drift than DualShock 4 — early detection prevents ruined sessions.

Leave sticks untouchedUnder 0.03 = normalAbove 0.08 = early drift
4

Test L2 & R2 Triggers

Switch to the "L2 / R2 Triggers" tab. Squeeze each trigger slowly from 0% to 100% and release. The bar should fill and return smoothly. Confirm L2 and R2 both read 0% at rest and reach close to 100% at full press. A trigger stuck above 2% at rest has spring drift. A trigger not reaching 90% at full press has mechanical wear or debris.

0% at rest100% at full pressSmooth travel
5

Test Haptics & Rumble

Switch to "Haptic / Rumble" and press "Test Haptic". Hold the controller in both hands — you should feel vibration in both grips. Use the Strong/Weak sliders to test each motor's intensity independently. If one grip is completely silent at 100%, that motor is dead. Try the Heartbeat and Gunshot patterns to stress-test rapid cycling. Requires USB-C for best haptic intensity on DualSense.

Both grips vibrateUSB-C for full powerTest patterns
Why Use Gamepad Tester for DualSense

Why Choose Gamepad Tester for PS5 DualSense Testing

No PS5 Console Required

Test your DualSense entirely on PC or Mac — no PlayStation 5 needed. Just connect via USB-C or Bluetooth and all buttons, sticks, triggers, and basic haptics are fully testable in the browser.

100% Private — Zero Upload

Every button press, stick position, and trigger value is processed locally in your browser via the Web Gamepad API. No controller data is ever sent to any server — your inputs stay entirely on your device.

Every DualSense Feature in One Page

Buttons, sticks, drift, triggers, haptics, gyroscope, and touchpad — all in six tabbed panels on one page. No need for multiple tools or separate apps to get a complete DualSense diagnostic.

Real-Time at 250Hz

The DualSense polls at 250Hz (every 4ms) over USB — faster than Xbox's 125Hz. Gamepad Tester reads every state change at this rate, giving you the most accurate real-time button and trigger readings available in a browser.

DualSense Edge Supported

The DualSense Edge (PS5 Pro controller with swappable stick modules, back buttons, and adjustable trigger stops) is fully supported. All standard inputs register identically to the base DualSense. Pro hardware features require Sony's companion app or the PS5 console.

Timestamped Input Log

Every button press, trigger change, and haptic fire is recorded in the input log with a millisecond timestamp. This makes it easy to catch intermittent faults — buttons that fail occasionally rather than consistently — which are often missed in a brief manual test.

Frequently Asked Questions

PS5 DualSense Test FAQs

Can I test my PS5 DualSense controller without a PS5 console?
Yes — completely. The PS5 DualSense is plug-and-play on Windows 10/11 and macOS. Simply connect via USB-C cable or pair via Bluetooth in your OS settings. No drivers, no additional software, and no PS5 console are required for basic testing. Open Gamepad Tester in Chrome or Edge, press any button, and all 17+ inputs become testable immediately. The only features that require a PS5 console are the advanced audio-based haptics and adaptive trigger resistance programming — the analog trigger range (0–100%) is fully readable on PC.
How do I fix PS5 DualSense stick drift?
First confirm the drift using this tester — leave both sticks untouched and watch the idle drift values. If they exceed 0.08 consistently, drift is present. Start with a soft reset: hold the small reset button on the back of the DualSense for 5 seconds with a pin, then reconnect. Next, try cleaning around the base of the analog sticks with a can of compressed air and a small amount of isopropyl alcohol on a cotton swab — debris under the stick cap is a common cause. If cleaning doesn't help, the underlying potentiometer is worn. Sony has issued a warranty extension for DualSense drift on controllers purchased before a certain date — contact PlayStation Support with your controller's serial number before attempting hardware repair.
Can I test DualSense adaptive triggers on PC?
Partially. This tester reads the full 0–100% analog range of L2 and R2 — you can confirm the triggers register from rest to full press and release smoothly. What cannot be tested in a browser is the physical resistance — the motorized mechanism that creates spring tension, hard stops, or partial locks during gameplay. Testing adaptive trigger resistance on PC requires either DualSenseX (DSX), a paid application that lets you program trigger effects on PC, or a native PC game that supports adaptive triggers (like Call of Duty, Deathloop, or Cyberpunk 2077 via Steam). The browser Gamepad API does not currently expose trigger actuator commands.
Why is my DualSense not detected in the browser?
The five most common reasons are: (1) You haven't pressed a button after connecting — the browser Gamepad API requires a button press before it exposes the controller for privacy reasons. (2) You are using Safari or Firefox — DualSense advanced features require Chrome or Edge. (3) Steam's controller management is hijacking the input — close Steam completely and retry. (4) The USB cable is charge-only and not a data cable — use the official USB-C cable that came with the DualSense or any USB-C data cable. (5) The Bluetooth pairing is incomplete — remove the existing pairing from Windows Bluetooth settings, hold PS + Create for 3 seconds until the light bar flashes rapidly, then re-pair.
Does this tester work with the DualSense Edge?
Yes — the DualSense Edge is fully supported. All standard inputs (17 buttons, 2 analog sticks, 2 adaptive triggers, D-pad, touchpad) register identically to the base DualSense and are testable in this tool. The Edge-exclusive features — swappable stick module profiles, back button remapping, adjustable trigger stops, and per-profile settings — require the Sony PlayStation Accessories app on PS5 and are not accessible via the Web Gamepad API. For PC-based trigger and profile customization on the Edge, DualSenseX provides some support for advanced features.
What is the PS5 DualSense's polling rate on PC?
The DualSense polls at 250Hz (every 4ms) over USB-C — significantly faster than Xbox controllers which are locked at 125Hz (8ms). This means DualSense button and trigger inputs arrive at the browser twice as frequently as Xbox inputs, giving lower theoretical minimum latency. Over Bluetooth, the DualSense typically operates at the same 250Hz rate with slightly higher latency due to wireless overhead (approximately 16–30ms total vs 4ms wired). The DualSense can be overclocked to 1000Hz or even 8000Hz on PC using third-party utilities, which reduces latency further for competitive play.
How do I test the DualSense gyroscope on PC?
The DualSense gyroscope is most accessible on macOS and Linux using Chrome or Edge over Bluetooth — on these platforms, gyro data is exposed natively via the Gamepad API's extended axis list. On Windows, the standard HID driver does not forward gyro data to the browser. To enable gyro testing on Windows, open Steam and navigate to Settings → Controller → PlayStation Configuration Support, enable it, and launch Steam before opening the tester. Steam creates a virtual gamepad that includes gyro axes. Alternatively, DS4Windows and DSX expose gyro axes on Windows as part of their virtual controller remapping.
Is the PS5 DualSense test completely free?
Yes — entirely free. No download, no installation, no account, no email address, and no payment of any kind is required. The entire test runs in your browser using the Web Gamepad API. All button presses, trigger values, stick positions, and haptic commands are processed locally on your device. No data is collected, uploaded, or shared with any third party at any point during testing.

Gamepad Tester — free browser-based PS5 DualSense controller test. Works on PC and Mac via Chrome or Edge. No PS5 console required. Tests buttons, sticks, triggers, haptics, gyroscope, and touchpad via Web Gamepad API. All data processed locally.  ·  ← Back to Gamepad Tester